Netgear WiFi router is one of the most trusted brands to consider in today’s modern era. If you want to access internet on your devices, then you must opt for Netgear router. However, to stream videos, shop online, or to play online games, you need to setup Netgear router via routerlogin.net setup in the correct manner.
In this article, we have mentioned everything that is needed to program Netgear router. So, without much delay, let’s make things working for you.
How to program Netgear WiFi Router?
Note: No matter which Netgear WiFi router model you have, then process of Netgear router setup will be the same for all of them. Hence, have a quick nudge at the step-by-step instructions outlined underneath and learn the process of programming the WiFi router in a flash.
Although there are two ways following which you can program the router, however, you can choose anyone of the methods as per your comfort. Keep reading!
Program Netgear Router Using the Manual Method
Step 1: First, you have to unbox your WiFi router and then choose a working wall socket near to your modem.
And, if you don’t have the wall plug for your router closer to your modem, then you can make use of an extension cord.
Step 2: Turn on your WiFi router and ensure that its respective wall outlet is providing it sufficient power supply.
Once you are done applying the two steps listed above, take an Ethernet cable and connect your router and modem firmly. Please ensure that you have a non-damage cable handy and you have inserted it into the correct ports of your router and modem.
Step 3: Now, you need to open up a laptop anything you have and then have access to the Netgear router’s SSID. Be certain that you have updated the software of the device already! If not, do the needful first before putting the device in use.
Step 4: Launch a web browser of your choice and then you need to enter routerlogin.net in the address bar. Keep in mind, the web address will not work for you if:
-
The browser version you are using is outdated
-
And,routerlogin.net consists of spelling mistakes.
Pro Tip: You can also try using router’s default IP, 192.168.1.1 instead of the web address.
Step 5: Press the Enter key and you will be redirected to the routerlogin.net Netgear page.
Step 6: Now, the time has come where you have to input the routerlogin.net admindetails of your WiFi router into the fields provided. Once you are done inputting the details, you can hit the Log In button.
Step 7: Hitting on the Log In button will take you on the Netgear Genie setup wizard where you have to walk through the on-screen instructions and apply them in the exact given order to complete the process of programming Netgearrouter with ease.
Here ends our section on how to program Netgear router using the manual method. If you don’t want to apply this method, then read our next section.
Program Netgear Router Using the WPS Method
The easiest method through which you can program Netgear router in the blink of an eye is the WPS method.
Here are the guidelines that you have to implement:
Step 1: Turn on your Netgear router.
Step 2: Upon plugging in the router, the power LED on it will start blinking. Please wait till the LED gets stable.
Step 3: Ensuring the stable LED on the router, locate and press the WPS button on it.
Step 4: Wait for a few minutes and then press the WPS button on your internet modem.
And, there you are! You are done programming Netgear router using the WPS method. Now, log in to your Netgear device using routerlogin.net admin details and take the plunge to update the router’s firmware.
Let’s now wrap up our article on how to program Netgear router. We really hope that the step-by-step instructions we have provided you here will help you get the job done with ease.